Monday, October 31, 2011

CBT Nuggets Advanced EIGRP lab configuration

I ended up finding out that some IP addresses I had set a previous time I had the Junos lab open had stayed attached to the interface. Once I figured out how to delete the addresses, (or I could have just made the IP I wanted active, the primary address) it pinged through fine.

Anyway, with this solved, back to the CCNP studying.

Reworked the EIGRP CBT Nuggets lab in GNS3. These Configs include everything in videos 5 and 6, including the Frame relay router setup.

DON'T Forget to set your clocks in your routers...




Frame Relay Switch

!
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname FRS
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
ip cef
!
!
!
!
no ip domain lookup
!
!
!
frame-relay switching
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
! 
!
!
!
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0
 no ip address
 encapsulation frame-relay
 clock rate 2000000
 frame-relay intf-type dce
 frame-relay route 102 interface Serial0/1 201
 frame-relay route 103 interface Serial0/2 301

!
interface Serial0/1
 no ip address
 encapsulation frame-relay
 clock rate 2000000
 frame-relay intf-type dce
 frame-relay route 201 interface Serial0/0 102
!
interface Serial0/2
 no ip address
 encapsulation frame-relay
 clock rate 2000000
 frame-relay intf-type dce
 frame-relay route 301 interface Serial0/0 103
!
interface Serial0/3
 no ip address
 shutdown
 clock rate 2000000
!
interface Serial0/4
 no ip address
 shutdown
 clock rate 2000000
!
interface Serial0/5
 no ip address
 shutdown
 clock rate 2000000
!
!
!
!
ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
 password telnet
 login
!
!
end

Head Quarters Router

!
!
! Last configuration change at 12:25:56 UTC Sun May 16 2010
! NVRAM config last updated at 13:54:50 UTC Sun May 16 2010
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname HQTRS
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
ip cef
!
!
!
!
no ip domain lookup
!
!
!
!
!
key chain EIGRP_KEYS
 key 1
  key-string cisco1
  accept-lifetime 00:00:00 Jan 1 2010 00:00:00 Feb 1 2010
  send-lifetime 00:00:00 Jan 1 2010 00:00:00 Feb 1 2010
 key 2
  key-string cisco2
  accept-lifetime 00:00:00 Jan 28 2010 infinite
  send-lifetime 00:00:00 Jan 28 2010 infinite
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
! 
!
!
!
!
interface Loopback1
 ip address 10.1.1.1 255.255.255.0
!
interface Loopback2
 ip address 10.1.2.1 255.255.255.0
!
interface Loopback3
 ip address 10.1.3.1 255.255.255.0
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0
 no ip address
 encapsulation frame-relay
 clock rate 2000000
!
interface Serial0/0.1 multipoint
 ip address 172.16.124.1 255.255.255.248
 ip authentication mode eigrp 25 md5
 ip authentication key-chain eigrp 25 EIGRP_KEYS
 ip bandwidth-percent eigrp 25 80
 no ip split-horizon eigrp 25
 ip summary-address eigrp 25 10.1.0.0 255.255.252.0 5
 frame-relay map ip 172.16.124.2 102 broadcast
 frame-relay map ip 172.16.124.3 103 broadcast
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/1
 no ip address
 shutdown
 clock rate 2000000
!
interface Serial0/2
 no ip address
 shutdown
 clock rate 2000000
!
interface Serial0/3
 no ip address
 shutdown
 clock rate 2000000
!
!
router eigrp 25
 network 10.1.0.0 0.0.255.255
 network 172.16.0.0
 no auto-summary
!
!
!
ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
 password telnet
 login
!
ntp master
!
end



EAST

!
!
! NVRAM config last updated at 13:55:10 UTC Sun May 16 2010
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname EAST
!
boot-start-marker
boot-end-marker
!.
!
no aaa new-model
memory-size iomem 5
ip cef
!
!
!
!
no ip domain lookup
!
!
!
!
!
key chain EIGRP_KEYS
 key 1
  key-string cisco1
  accept-lifetime 00:00:00 Jan 1 2010 00:00:00 Feb 1 2010
  send-lifetime 00:00:00 Jan 1 2010 00:00:00 Feb 1 2010
 key 2
  key-string cisco2
  accept-lifetime 00:00:00 Jan 28 2010 infinite
  send-lifetime 00:00:00 Jan 28 2010 infinite
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
! 
!
!
!
!
interface Loopback1
 ip address 10.2.1.1 255.255.255.0
!
interface Loopback2
 ip address 10.2.2.1 255.255.255.0
!
interface Loopback3
 ip address 10.2.3.1 255.255.255.0
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0
 no ip address
 encapsulation frame-relay
 clock rate 2000000
!
interface Serial0/0.1 point-to-point
 ip address 172.16.124.2 255.255.255.248
 ip authentication mode eigrp 25 md5
 ip authentication key-chain eigrp 25 EIGRP_KEYS
 ip summary-address eigrp 25 10.2.0.0 255.255.252.0 5
 frame-relay interface-dlci 201   
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/1
 no ip address
 shutdown
 clock rate 2000000
!
!
router eigrp 25
 network 10.2.0.0 0.0.255.255
 network 172.16.0.0
 no auto-summary
!
!
!
ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
 password telnet
 login
!
ntp server 172.16.124.1
!
end


WEST

!
!
! NVRAM config last updated at 13:55:07 UTC Sun May 16 2010
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname WEST
!
boot-start-marker
boot-end-marker
!
no aaa new-model
memory-size iomem 5
ip cef
!
!
!
!
no ip domain lookup
!
!
!
!
!
key chain EIGRP_KEYS
 key 1
  key-string cisco1
  accept-lifetime 00:00:00 Jan 1 2010 00:00:00 Feb 1 2010
  send-lifetime 00:00:00 Jan 1 2010 00:00:00 Feb 1 2010
 key 2
  key-string cisco2
  accept-lifetime 00:00:00 Jan 28 2010 infinite
  send-lifetime 00:00:00 Jan 28 2010 infinite
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
! 
!
!
!
!
interface Loopback1
 ip address 10.3.1.1 255.255.255.0
!
interface Loopback2
 ip address 10.3.2.1 255.255.255.0
!
interface Loopback3
 ip address 10.3.3.1 255.255.255.0
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0
 no ip address
 encapsulation frame-relay
 clock rate 2000000
!
interface Serial0/0.1 point-to-point
 ip address 172.16.124.3 255.255.255.248
 ip authentication mode eigrp 25 md5
 ip authentication key-chain eigrp 25 EIGRP_KEYS
 ip summary-address eigrp 25 10.3.0.0 255.255.252.0 5
 frame-relay interface-dlci 301   
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/1
 no ip address
 shutdown
 clock rate 2000000
!
!
router eigrp 25
 network 10.3.0.0 0.0.255.255
 network 172.16.0.0
 no auto-summary
!
!
!
ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
 password telnet
 login
!
ntp server 172.16.124.1
!
end




Posted by at

7 comments:

  1. AnonymousApril 23, 2012 at 5:35 PM

    Thank you for showing the set up for the FRS router. I've been working on this for a couple of days now. On the plus side I've learned some new things through research.

    ReplyDelete
  2. AnonymousMay 9, 2012 at 4:54 PM

    Great! I had issues configuring the FRS router. Thanks for sharing this!

    ReplyDelete
  3. AnonymousJanuary 24, 2014 at 4:59 PM

    Why didn't you setup multipoint on the east and west routers

    ReplyDelete
  4. UnknownJanuary 26, 2014 at 2:02 PM

    It's been a while, but I believe it was because it wasn't set up in the CBT nuggetz vid.

    ReplyDelete
  5. AnonymousApril 16, 2014 at 8:50 AM

    i tried to setup multipoint, but i cannot ping the loopback interfaces on east router from west router and vice versa, but i can see both routes on the routing table anyone can advise me what the problem is?

    ReplyDelete
  6. AnonymousMay 18, 2014 at 8:04 AM

    You have to enable split horizon on the subinterface of the HQ router

    ReplyDelete
  7. sriramJanuary 27, 2016 at 1:07 PM

    Thank you

    ReplyDelete

Subscribe to: Post Comments (Atom)