Home Lab build-out step-by-by step

I realized I started the blog (way back in 2011) after I had already built my original lab.

So, I'll use this opportunity to add a bit of a how-to on what you will likely encounter when building a home lab.

What my lab will now encompass.

Rack 1

• 3x Cisco 2611xm, 256/64 memory, running c2600-advipservicesk9-mz.124-1c
• 2x Cisco 3550, running c3550-ipservicesk9-mx.122-44.SE6
• 2x Cisco 3560, running c3560-ipservicesk9-mz.122-55.SE.bin
• Probably 4x 1721's as hosts, not sure yet.
• Synaccess NPC-88G2 Remote Power Reboot and Console Port Management System (8 port access router, and power strip)

Rack 2

• 4x Cisco 1841, 256/64 memory, running c1841-advipservicesk9-mz.151-2.T2
• 3x Cisco  3550, running c3550-ipservicesk9-mx.122-44.SE6
• 2611 running as a Frame-Relay switch
• 2611 running as a BB router
• Synaccess NPC-88G2 Remote Power Reboot and Console Port Management System (8 port access router, and power strip)

Still have to purchase the 1841's, the 172x's, and the Frame relay switch.